BT Nyloplast Schachtanschlüsse für den Einsatz in Beton- und Mauerwerkschächten sowie Wanddurchführungen.

Shaft connectors

PUSH-IN AND CAST-IN CONNECTORS

Cast-in connectors are cast into a chamber or pipe during the production process. Alternatively, they can be bricked in and then embedded in an oversized hole. To do this, they are pressed into a hole drilled beforehand with a specific diameter (and low tolerance).

We produce push-in and cast connectors for both horizontal and vertical applications. Push-in and cast connectors for vertical applications are equipped with a reinforced stop to withstand the pressure load (40kN according to Dutch standards). They are also provided with a special rubber seal to allow easy mounting of a standpipe (which must not be bevelled!).

Push-in and cast connections for horizontal applications are available with and without a stop, depending on the ease of installation compared to the standards or local customs. The absence of a stop can result in easier assembly and a higher expansion tolerance. Concrete connectors may be sand-painted for better attachment to the concrete.

Concrete connectors can be provided with a flange, which creates a longer "water passage" and protects the connector from deformation. A flange can be placed either at the beginning, in the middle or at the end of the connector. Another option is to have more than one flange on the connector. Concrete connectors for horizontal and vertical applications are also available in a flexible version. In this case, the socket is expanded after the ring chamber, which allows an angular movement of 6° in all directions. Concrete connectors for horizontal and vertical applications can be provided with a radially tapering start or end piece, which avoids protrusion or protrusion on the concrete wall.

Shaft connectors 1.png

We offer a wide range of pipe connectors for concrete and masonry manholes and wall penetrations. These connectors are available in diameters from 100 mm up to 630 mm, in white, beige, black, grey (RAL 7037) and orange brown (RAL 8023).

Shaft connectors

  • APPLICATION AREA

    Pipe connectors to concrete manholes or masonry; wall penetrations

  • APPROVAL

    Germany, Netherlands, Belgium, Hungary and Romania
    Check for possible exceptions

  • MATERIAL DESIGNATION

    Polystyrene PS + S/B, Acrylnitril-Butadine-Styrol (Acrylonitrile butadiene styrene), PVC-U

  • STANDARD

    Test and monitoring regulation HR 3.23 of the SKZ, BRL 9206

  • DIAMETER

    DN 100 - 630mm

  • COLOURS

    White, beige, black, grey RAL7037, orange brown RAL8023

  • SEALING RING SYSTEM

    BL lip seal / sliding wedge seals / SK fix seal

  • PACKAGING TYPES

    · in packs or in cartons
    · on one-way paletts wrapped in shrink-foil
    · in different pcs/unit